Rivets are not just for looks—they're all about reinforcement and durability, especially in areas that take a lot of stress, like pocket corners, bag straps, or tool rolls.
When stitching alone might wear out over time, rivets help hold multiple layers together, spreading the strain and preventing tearing.
They’re especially useful on tough fabrics like denim, canvas, or leather, where heavy use is expected.
[If you've purchased a jeans hardware kit, make sure you select the smooth posts for your rivets, NOT the ridged posts, which pair with the jeans buttons instead.]
How to install a rivet:
*If this is your first time we recommend testing the entire process on scrap fabric first before tackling your actual project!
Measure Rivet Post
If the post is too long for the fabric thickness you're working with, the cap won’t sit snugly, and you risk a loose or wobbly rivet that could pop off over time.
To trim it, you can use wire cutters or a metal file to shorten the post slightly. Just be careful not to over-trim—there still needs to be enough length for the cap to grab onto and set securely. After trimming, file any sharp edges so the cap can sit flush and press evenly.
Mark Rivet Position onto Fabric
Use chalk or a disappearing pen to mark where you want your rivet to go.
Punch Hole Through the Fabric
Use a large needle (like an embroidery needle) to push a hole through the fabric weave. ideally you want to be separating the threads rather than breaking them.
Use an awl to widen the hole.
The hole needs to be big enough to accommodate the width of the rivet post.
Insert Rivet Post from the Back
Back:
Front:
Add Cap
Place the cap on the front and make sure it's sitting straight and level.
Secure it using a rivet setter, hammer or a hand press.
Protect the cap from dents and scratches by covering with a roll of fabric or similar before securing in place.
Tackle your Actual Project
The result is a clean, industrial-strength finish that lasts—and looks great, too.
#JeansSamplerToolRollExtraResources #InstallingRivets